Trajectory generation of space telerobots

The purpose is to review a variety of trajectory generation techniques which may be applied to space telerobots and to identify problems which need to be addressed in future telerobot motion control systems. As a starting point for the development of motion generation systems for space telerobots, the operation and limitations of traditional path-oriented trajectory generation approaches are discussed. This discussion leads to a description of more advanced techniques which have been demonstrated in research laboratories, and their potential applicability to space telerobots. Examples of this work include systems that incorporate sensory-interactive motion capability and optimal motion planning. Additional considerations which need to be addressed for motion control of a space telerobot are described, such as redundancy resolution and the description and generation of constrained and multi-armed cooperative motions. A task decomposition module for a hierarchical telerobot control system which will serve as a testbed for trajectory generation approaches which address these issues is also discussed briefly

NASREN: Standard reference model for telerobot control

A hierarchical architecture is described which supports space station telerobots in a variety of modes. The system is divided into three hierarchies: task decomposition, world model, and sensory processing. Goals at each level of the task dedomposition heirarchy are divided both spatially and temporally into simpler commands for the next lower level. This decomposition is repreated until, at the lowest level, the drive signals to the robot actuators are generated. To accomplish its goals, task decomposition modules must often use information stored it the world model. The purpose of the sensory system is to update the world model as rapidly as possible to keep the model in registration with the physical world. The architecture of the entire control system hierarch is described and how it can be applied to space telerobot applications

Hierarchical control of intelligent machines applied to space station telerobots

A hierarchical architecture is described which supports space station telerobots in a variety of modes. The system is divided into three hierarchies: task decomposition, world model, and sensory processing. Goals at each level of the task decomposition hierarchy are divided both spatially and temporally into simpler commands for the next lower level. This decomposition is repeated until, at the lowest level, the drive signals to the robot actuators are generated. To accomplish its goals, task decomposition modules must often use information stored in the world model. The purpose of the sensory system is to update the world model as rapidly as possible to keep the model in registration with the physical world. The architecture of the entire control system hierarchy and how it can be applied to space telerobot applications are discussed

Information Surfing for Radiation Building

We develop a control scheme for a group of mobile sensors to map radiation over a given planar polygonal region. The advantage of this methodology is that it provides quick situational awareness regarding radiation levels, which is being updated and refined in real- time as more measurements become available. The control algorithm is based on the concept of information surfing, where navigation is done by following information gradients, taking into account sensing performance and the dynamics of the observed proces

Experimental research activity on additive manufacturing of microwave passive waveguide components

All metal passive waveguide components are key building-blocks of several RF systems used for telecommunications, navigation, imaging, radio-astronomy, and cosmology. The accurate manufacture of these devices in Additive Manufacturing (AM) technologies can open the way to a high integration level of microwave functionalities with a significant cost and mass reduction. In the paper, after an introduction on the most common AM technologies with particular detail on selective laser melting (SLM) and stereo-lithography apparatus (SLA) processes, the results on the on-going research activity are discussed. Measured performances are reported for AM prototypes of Ku/K/Ka-band rectangular and circular waveguide lines, microwave filters and a smooth wall horn

Removable Thin Films used for the Abatement and Mitigation of Beryllium

The use of removable thin films for the abatement of hazardous particulates has many advantages. Removable thin films are designed to trap and fix particulates in the film's matrix by adhesion. Thin films can be applied to an existing contaminated area to fix and capture the particulates for removal. The nature of the removable thin films, after sufficient cure time, is such that it can typically be removed as one continuous entity. The removable thin films can be applied to almost any surface type with a high success rate of removal

Maternal Risk of Breeding Failure Remained Low throughout the Demographic Transitions in Fertility and Age at First Reproduction in Finland

Radical declines in fertility and postponement of first reproduction during the recent human demographic transitions have posed a challenge to interpreting human behaviour in evolutionary terms. This challenge has stemmed from insufficient evolutionary insight into individual reproductive decision-making and the rarity of datasets recording individual long-term reproductive success throughout the transitions. We use such data from about 2,000 Finnish mothers (first births: 1880s to 1970s) to show that changes in the maternal risk of breeding failure (no offspring raised to adulthood) underlay shifts in both fertility and first reproduction. With steady improvements in offspring survival, the expected fertility required to satisfy a low risk of breeding failure became lower and observed maternal fertility subsequently declined through an earlier age at last reproduction. Postponement of the age at first reproduction began when this risk approximated zero–even for mothers starting reproduction late. Interestingly, despite vastly differing fertility rates at different stages of the transitions, the number of offspring successfully raised to breeding per mother remained relatively constant over the period. Our results stress the importance of assessing the long-term success of reproductive strategies by including measures of offspring quality and suggest that avoidance of breeding failure may explain several key features of recent life-history shifts in industrialized societies

Altruism and sacrifice : mafia free gift giving in south Italy

As a social phenomenon that torments modern states, mafia receives considerable political and legal attention. The term mafia itself is often directly related to criminality and violence. Thus far violence has been employed as an analytical construct that could explain compliance with the mafia ethos. Nevertheless this schema fails to take into consideration possible discourses that make mafia tolerable. Drawing on fieldwork conducted in Reggio Calabria, South Italy, this paper explores distinctive mafia notions of giving and charity. Mafia free gifts, albeit rare, are paradoxical in the sense that through elaborate speech registers both the donor and the recipient debase the very act of gift-giving so as not to be bound in relations of reciprocity and obligation. These mafia gifts, which have so far escaped anthropological attention, are conceptualised as tropes of worldly imagining aspiring to non-worldly discourses. Status, umiltà, duty and sacrifice frame free gifting as accorded to the overt religious rhetoric of mafia hierarchy. In this paper I argue that a) free gifting embraces a series of complex non-violent discourses which relate closely to religious duty and altruism but work alongside capitalist systems b) in principal these gifts do not bind people, yet are imbued with the potential of a relation.PostprintPeer reviewe

Cork : properties, capabilities and applications

Cork is a natural, renewable, sustainable raw material that has been used for many centuries. As a result of this very long term interest, the scientific literature on cork is extensive. The present review focuses on the chemical composition, physical and mechanical properties of cork and on its products and sub-products. The substantial efforts to fully characterise cork, as well as new developments and evolving research, are reviewed, beginning with its histology, growth and morphology (at macro- and microscales). The chemical structure is analysed in detail, covering both the materials that form the wall structure and the low molecular weight, extractable components. The unique properties of cork are discussed and correlated with current knowledge on morphology and chemical structure. Finally, the important industrial applications of cork are reviewed, in the context of research to provide cork with novel, high added-value applications